Share:
Lubricus® MTC Chain Oil Series
Brand: Lubricus
Category:
Mineral Oil
Select variant(s): ISO VG 68, ISO VG 150, ISO VG 220, ISO VG 320
ISO VG 68:
More
ISO VG 150:
More
ISO VG 220:
More
ISO VG 320:
More
Specifications
SKU: Lubricus® MTC Chain Oil Series
Packing: Available in 18-L pails and 209-L drums | Also available in single-point auto-lubricator with pre-filled capacity of 125ml & 250ml
Lubricus MTC Chain Oil Series
Premium Silicone-Free Industrial Chain Lubricant (ISO VG 68, 150, 220 & 320)
DESCRIPTION
LUBRICUS® MTC is a high-performance industrial chain oil engineered for demanding environments operating between -10°C and 120°C. Its silicone-free, high-tack formulation is specifically designed to penetrate deep into critical wear points while resisting centrifugal "fling-off" and environmental wash-out.
CORE PERFORMANCE BENEFITS
- Deep-Creep Penetration: Engineered with low surface tension to migrate into tight- tolerance pins, bushings, and rollers, neutralizing wear at the source.
- High Adhesion (Anti-Fling): Formulated with inherent tackiness to maintain a robust lubricating film on high-speed chains, even under heavy mechanical loads.
- Environmental Resilience: Provides superior resistance to water-wash and steam, maintaining film strength in humid or wet processing conditions.
- Advanced Wear & Corrosion Protection: Utilizing high-tier additive technology to prevent metal-to-metal contact and shield surfaces against oxidation and rust.
- Process Compatibility: 100% silicone-free to ensure total compatibility with downstream painting, coating, and finishing processes.
Specifications & Applications
Available Viscosities: ISO VG 68, 150, 220, 320
Primary Applications:
- Heavy-Duty Conveyors: Roller, drive, and elevator chains.
- Precision Machinery: Textile and agricultural equipment.
- General Industry: Any chain system operating within the -10°C to 120°C thermal window.
VISCOSITY SELECTION:
Selecting the correct viscosity is critical for balancing penetration (getting into the pins) with retention (staying on the chain).Lower viscosities (ISO VG 68) are generally preferred for smaller, high-speed chains where the oil needs to "creep" into tight tolerances quickly. Higher viscosities (ISO VG 320) are best for large, slow-moving chains under heavy shock loads.
.png)
Directions for Use:
- Apply liberally to the chain, ensuring complete coverage of rollers, pins, and bushings.
- For optimal performance, clean the chain prior to initial application. Re-application frequency will depend on operating conditions, load, speed, and environmental factors.
- Consult equipment manufacturer's recommendations for specific lubrication intervals.
- Suitable for centralized chain lubrication system and auto-chain lubrication applications.
- Lubricus ELTC series are available for extreme low temperatures applications.
- Lubricus HTC series are available for high temperatures applications.
Standard Available Pack Sizes:
18L pail & 209L drum.
Also available in filled single-point auto lubricator in 125ml & 250ml capacity.
Health, Safety & Handling:
- Handling: Maintain handling temperatures below 75°C to preserve premium additive performance. Avoid direct contact with skin and eyes. Wear appropriate protective equipment during transfers.
- Storage: Store in a cool, dry, well-ventilated area away from direct sunlight, heat, or sparks.
- Shelf Life: 24 months from the date of manufacture when stored at ambient temperatures in original, unopened tightly sealed containers.
Inquiry - Lubricus® MTC Chain Oil Series